مقالات علمی چاپ شده در مجلات

1. "Improving the mechanical properties of high-entropy alloys via germanium addition: A focused review"
   Alireza Kalhor, Mohammad Javad Sohrabi, Hamed Mirzadeh Soltanpour, Milad Zolfipour Aghdam, Mohammad Sajad Mehranpour, Kinga Rodak, Hyoung Seop Kim
   JOURNAL OF ALLOYS AND COMPOUNDS, Vol. 1010, 2025
2. "Grain refinement of austenitic stainless steels by cross rolling and annealing treatment: A review"
   Sara Mohammadzehi, Hamed Mirzadeh Soltanpour
   Journal of Ultrafine Grained and Nanostructured Materials, Vol. 57, No 2, 2024
3. "Remarkable mechanical properties at room and cryogenic temperatures in a metastable high-entropy system through BCC and HCP martensitic transformations"
   Mohammad javad Sohrabi, Saeed Sadeghpour, Mohammad Sajad Mehranpour, Alireza Kalhor, Hamed Mirzadeh Soltanpour, Kinga Rodak, Reza Mahmuodi, Hyoung Seop Kim
   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, Vol. 915, 2024
4. "Shear mechanical properties of AISI 316L stainless steel processed by unidirectional/cross rolling and annealing treatment"
   Sara Mohammadzehi, Hamed Mirzadeh Soltanpour, Reza Mahmuodi
   MATERIALS CHEMISTRY AND PHYSICS, Vol. 327, 2024
5. "Improved Mechanical Properties of ZX21 Magnesium Alloy by Mischmetal Addition and Hot Deformation"
   ZAHRA ZAREIAN, Mehdi Malekan, Massoud Emamy, Hamed Mirzadeh Soltanpour
   JOM, Vol. 76, No 11, pp.6816-6822, 2024
6. "Remarkable Cryogenic Strength and Ductility of AISI 904L Superaustenitic Stainless Steel: A Comparative Study"
   Mohammad javad Sohrabi, Hamed Mirzadeh Soltanpour, Saeed Sadeghpour, Reza Mahmuodi, Alireza Kalhor, Kinga Rodak, Hyoung Seop Kim
   METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, Vol. 55, No 11, pp.4310-4317, 2024
7. "Exceptional strength-ductility synergy in the novel metastable FeCoCrNiVSi high-entropy alloys via tuning the grain size dependency of the transformation-induced plasticity effect"
   Mohammad Sajad Mehranpour, Mohammad javad Sohrabi, Alireza Kalhor, Jae Heung Lee, Ali Heydarinia, Hamed Mirzadeh Soltanpour, Saeed Sadeghpour, Kinga Rodak, Mahmoud Nili Ahmadabadi, Reza Mahmuodi, Hyoung Seop Kim
   INTERNATIONAL JOURNAL OF PLASTICITY, Vol. 182, 2024
8. "Deformation-induced martensitic transformation kinetics in TRIP-assisted steels and high-entropy alloys"
   Mohammad javad Sohrabi, Mohammad Sajad Mehranpour, Ali Heydarinia, Alireza Kalhor, Jae Heung Lee, Hamed Mirzadeh Soltanpour, Reza Mahmuodi, Mohammad Habibi Parsa, Kinga Rodak, Hyoung Seop Kim
   ACTA MATERIALIA, Vol. 280, 2024
9. "Interplay between temperature-dependent strengthening mechanisms and mechanical stability in high-performance austenitic stainless steels"
   Mohammad javad Sohrabi, Hamed Mirzadeh Soltanpour, Saeed Sadeghpour Galooyak, Milad Zolfipour aghdam vayghan, Abdol Reza Geranmayeh, Reza Mahmuodi
   International Journal of Minerals Metallurgy and Materials, Vol. 31, No 10, pp.2182-2188, 2024
10. "Temperature-jump tensile tests to induce optimized TRIP/TWIP effect in a metastable austenitic stainless steel"
    Mohammad javad Sohrabi, Hamed Mirzadeh Soltanpour, Saeed Sadeghpour Galooyak, Abdol Reza Geranmayeh, Reza Mahmuodi
    International Journal of Minerals Metallurgy and Materials, Vol. 31, No 9, pp.2025-2036, 2024
11. "Overcoming strength-ductility trade-off in Si-containing transformation-induced plasticity high-entropy alloys via metastability engineering"
    Mohammad javad Sohrabi, Mohammad Sajad Mehranpour, Jae Heung Lee, Ali Heydarinia, Hamed Mirzadeh Soltanpour, Hyoung Seop Kimb
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, Vol. 908, 2024
12. "Corrosion behavior of cold rolled and continuously heated SUS 304L stainless steel"
    Mohammad javad Sohrabi, Changiz Dehghanian, Hamed Mirzadeh Soltanpour
    Journal of Ultrafine Grained and Nanostructured Materials, Vol. 57, No 1, pp.19-27, 2024
13. "Characterizing pearlite transformation in an API X60 pipeline steel through phase-field modeling and experimental validation"
    Mohammad Younesi Agraghi, Mohammad Habibi Parsa, Mostafa Ghane Ezabadi, Reza Roumina, Hamed Mirzadeh Soltanpour, Shuozhi Xu
    Frontiers in Materials, Vol. 11, 2024
14. "Effect of cold rolling route and annealing on the microstructure and mechanical properties of AISI 316 L stainless steel"
    Sara Mohammadzehi, Milad Roostaei, Hamed Mirzadeh Soltanpour, Reza Mahmuodi, Irmgard Wessensteiner
    MATERIALS CHARACTERIZATION, Vol. 214, 2024
15. "Annealing of an Austenitic Stainless Steel Deformed Under Shear Loading"
    Aqil Zergani, Hamed Mirzadeh Soltanpour, Reza Mahmuodi
    Metallography Microstructure and Analysis, Vol. 13, pp.436-442, 2024
16. "Hot deformation behavior analysis of as-cast CoCrFeNi high entropy alloy using Arrhenius-type and artificial neural network models"
    Mehrdad Karimzadeh, Mehdi Malekan, Hamed Mirzadeh Soltanpour, N.. Saini, L.. Li.
    INTERMETALLICS, Vol. 168, No 1, 2024
17. "Improved ductility of hot extruded Mg-0.5Zn-0.5Zr-1RE alloy by Li addition"
    Milad Maleki, Hamid Rostami, Hamed Mirzadeh Soltanpour, Massoud Emamy
    Journal of Materials Research and Technology-JMR&T, Vol. 30, pp.5820-5825, 2024
18. "Improved hardness of Mg-0.5Ni-xY alloys via grain refinement and formation of LPSO structures"
    Parastoo Mahmoud Kalayeh, Hamed Mirzadeh Soltanpour, Mehdi Malekan, Massoud Emamy, Reza Mahmuodi
    Journal of Materials Research and Technology-JMR&T, Vol. 30, pp.6829-6835, 2024
19. "Mechanical properties of lightweight Mg-1RE-0.5Zn-0.5Zr-xLi alloys"
    Hamid Rostami, Milad Maleki Pirbazari, Hamed Mirzadeh Soltanpour, Massoud Emamy
    ARCHIVES OF CIVIL AND MECHANICAL ENGINEERING, Vol. 24, No 2, 2024
20. "Tailoring the strengthening mechanisms of high-entropy alloys toward excellent strength-ductility synergy by metalloid silicon alloying: A review"
    Mohammad javad Sohrabi, Alireza Kalhor, Hamed Mirzadeh Soltanpour, Kinga Rodak, Hyoung Seop Kim
    PROGRESS IN MATERIALS SCIENCE, Vol. 144, No 1, 2024
21. "Tailoring the microstructure, mechanical properties, and electrical conductivity of Cu–0.7Mg alloy via Ca addition, heat treatment, and severe plastic deformation"
    Alireza Kalhor, Kinga Rodak, Marek Tkocz, Hanna Myalska-Glowacka, Ivo Schindler, Lukasz Poloczek, Krzysztof Radwanski, Hamed Mirzadeh Soltanpour, Michal Grzenik, Krzysztof Kubiczek, Marian Kampik
    ARCHIVES OF CIVIL AND MECHANICAL ENGINEERING, Vol. 24, No 2, 2024
22. "Tensile Properties and Corrosion Behavior of Biodegradable In Situ Formed Mg–Si Alloys and Composites"
    Mostafa Najafi, Hamed Mirzadeh Soltanpour, Rouhollah Mehdinavaz Aghdam, Massoud Emamy
    International Journal of Metalcasting, Vol. 18, No 4, pp.3449-3459, 2024
23. "Effect of sigma (σ) phase precipitation on the recrystallization kinetics of AISI 904L superaustenitic stainless steel"
    Mohammad javad Sohrabi, Milad Roostaei, Hamed Mirzadeh Soltanpour, Florian Spieckermann, Abdol Reza Geranmaye, Reza Mahmuodi
    VACUUM, Vol. 220, No 1, 2024
24. "Tailoring the microstructure and mechanical properties of LPSO-containing Mg–Ni cast alloy by yttrium addition"
    Parastoo Mahmoud Kalayeh, Amir Hossein Asadi, Hamed Mirzadeh Soltanpour, Mehdi Malekan, Massoud Emamy, Reza Mahmuodi
    Journal of Materials Research and Technology-JMR&T, Vol. 28, No 1, pp.744-751, 2024
25. "Hall-Petch analysis of fine-grained AISI 309Si stainless steel upon recrystallization and grain growth annealing"
    Kimia Saberi tavakoli, Ata Abdi, Mohammad javad Sohrabi, Alireza Kalhor, Hamed Mirzadeh Soltanpour
    Journal of Ultrafine Grained and Nanostructured Materials, Vol. 56, No 2, 2023
26. "Unveiling the Effect of Annealing Temperature on the Phase Transformations of Inconel 718 Super alloy Manufactured by Additive Manufacturing"
    Sajad Ghaemifar, Hamed Mirzadeh Soltanpour
    Iranian Journal of Materials Science and Engineering, Vol. 20, No 4, 2023
27. "Johnson–Mehl–Avrami–Kolmogorov (JMAK-type) Analysis of Deformation-Induced Martensitic Transformation in AISI 304L Stainless Steel"
    Mohammad javad Sohrabi, Hamed Mirzadeh Soltanpour, Saeed Sadeghpour Galooyak, Reza Mahmuodi
    Iranian Journal of Materials Science and Engineering, Vol. 20, No 4, 2023
28. "Unveiling the effects of Ti microalloying and thermomechanical processing on recrystallization behavior and mechanical properties of type 316 stainless steel"
    Sajedeh Valeh, Hamed Mirzadeh Soltanpour, Milad Roostaei, Mohammad javad Sohrabi
    Journal of Materials Research and Technology-JMR&T, Vol. 27, No 1, pp.6412-6423, 2023
29. "Phase transformation kinetics of high-carbon steel during continuous heating"
    Javad Rezaei, Mohammad Habibi Parsa, Hamed Mirzadeh Soltanpour
    Journal of Materials Research and Technology-JMR&T, Vol. 27, No 1, pp.2524-2537, 2023
30. "Precipitation kinetics of gamma double prime phase during direct aging treatment of Inconel 718 superalloy additively manufactured by selective laser melting"
    Sajad Ghaemifar, Hamed Mirzadeh Soltanpour
    Journal of Materials Research and Technology-JMR&T, Vol. 27, No 1, pp.4248-4255, 2023
31. "Tailoring the microstructure and mechanical properties of superaustenitic stainless steel by cold rolling and recrystallization annealing"
    Mohammad javad Sohrabi, Hamed Mirzadeh Soltanpour, Milad Roostaei, Oliver Renk, Abdol Reza Geranmayeh, Reza Mahmuodi
    Archives of Civil and Mechanical Engineering, Vol. 23, No 4, 2023
32. "Tailoring the Mechanical Properties of Copper‐Added Transformation‐Induced Plasticity‐Aided Multiphase Steel by Thermomechanical Processing"
    Saeed Deldar, Hamed Mirzadeh Soltanpour, Mohammad Habibi Parsa
    STEEL RESEARCH INTERNATIONAL, Vol. 95, No 2, 2023
33. "Grain size dependent mechanical properties of CoCrFeMnNi high-entropy alloy investigated by shear punch testing"
    Mohammad javad Sohrabi, Hamed Mirzadeh Soltanpour, Abdol Reza Geranmayeh, Reza Mahmuodi
    Journal of Materials Research and Technology-JMR&T, Vol. 27, No 1, pp.1258-1264, 2023
34. "Tailoring the microstructure and mechanical properties of (CrMnFeCoNi)100-C high-entropy alloys: Machine learning, experimental validation, and mathematical modeling"
    Mohammadreza Zamani Kouchesfehani, Milad Roostaei, Hamed Mirzadeh Soltanpour, Mehdi Malekan, Min Song
    Current Opinion in Solid State and Materials Science, Vol. 27, No 5, 2023
35. "Grain refinement and improved mechanical properties of Mg-4Zn-0.5Ca-0.5RE magnesium alloy by thermomechanical processing"
    Milad Maleki Pirbazari, Susanne Berndorf, Sara Mohammadzehi, Hamed Mirzadeh Soltanpour, Massoud Emamy, Madlen Ullmann, Ulrich Prahl
    Journal of Alloys and Compounds, Vol. 954, No 1, 2023
36. "Shear punch testing for evaluation of mechanical properties of post heat-treated Inconel 718 nickel-based superalloy fabricated by additive manufacturing"
    Sajad Ghaemifar, Hamed Mirzadeh Soltanpour
    Journal of Materials Research and Technology-JMR&T, Vol. 26, No 1, pp.8071-8078, 2023
37. "Superplasticity of a hot rolled Mg–3Zn–0.5RE–0.5Zr (ZEK300) alloy"
    Zeinab Savaedi, Hamed Mirzadeh Soltanpour, Rouhollah Mehdinavaz Aghdam, Reza Mahmuodi
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, Vol. 881, No 1, 2023
38. "Artificial neural network applicability in studying hot deformation behaviour of high-entropy alloys"
    Mohamad Reza Zamani, Hamed Mirzadeh Soltanpour, Mehdi Malekan
    MATERIALS SCIENCE AND TECHNOLOGY, Vol. 39, No 18, pp.1-9, 2023
39. "Enhanced corrosion resistance of the as-cast AZ91 magnesium alloy by micro-addition of the strontium and rare earth elements"
    Aria Afsharnaderi, Mehrab Lotfpour, Ahmad Bahmani, Hamed Mirzadeh Soltanpour, Mehdi Malekan, Massoud Emamy, Mojtaba Fatehi, Soraya Bornay Zonoozid
    MATERIALS SCIENCE AND TECHNOLOGY, Vol. 39, No 17, pp.2885-2899, 2023
40. "Grain refinement of magnesium alloys by dynamic recrystallization (DRX): A review"
    Hamed Mirzadeh Soltanpour
    Journal of Materials Research and Technology-JMR&T, Vol. 25, No 1, 2023
41. "Explaining the drop of work-hardening rate and limitation of transformation-induced plasticity effect in metastable stainless steels during tensile deformation"
    Mohammad javad Sohrabi, Hamed Mirzadeh Soltanpour, Saeed Sadeghpour Galooyak, Reza Mahmuodi
    SCRIPTA MATERIALIA, Vol. 231, No 1, 2023
42. "Superplasticity of fine-grained austenitic stainless steels: A review"
    Hamed Mirzadeh Soltanpour
    Journal of Ultrafine Grained and Nanostructured Materials, Vol. 56, No 1, pp.27-41, 2023
43. "Tailoring the strength-ductility balance of a commercial austenitic stainless steel with combined TWIP and TRIP effects"
    Mohammad Javad Sohrabi, Hamed Mirzadeh Soltanpour, Saeed Sadeghpour Galooyak, Abdol Reza Geranmayeh, Reza Mahmuodi
    Archives of Civil and Mechanical Engineering, Vol. 23, No 3, 2023
44. "Precipitation kinetics of niobium carbide (NbC) during homogenization heat treatment of additively manufactured Inconel 718 superalloy"
    Sajad Ghaemifar, Hamed Mirzadeh Soltanpour
    Journal of Materials Research and Technology-JMR&T, Vol. 25, 2023
45. "Precipitation kinetics and mechanical properties of Mg–Y–Zn and Mg–Y–Ni alloys containing long-period stacking ordered (LPSO) structures"
    Amir Hossein Asadi, Parastoo Mahmoud Kalayeh, Hamed Mirzadeh Soltanpour, Mehdi Malekan, Massoud Emamy
    Journal of Materials Research and Technology-JMR&T, Vol. 24, No 1, pp.9513-9522, 2023
46. "Surface metal-matrix composites based on AZ91 magnesium alloy via friction stir processing: A review"
    Hamed Mirzadeh Soltanpour
    International Journal of Minerals Metallurgy and Materials, Vol. 30, No 7, pp.1278-1296, 2023
47. "Unveiling the strengthening mechanisms of as-cast micro-alloyed CrMnFeCoNi high-entropy alloys"
    Mohamad Reza Zamani, Hamed Mirzadeh Soltanpour, Mehdi Malekan, Irmgard Weissensteiner, Milad Roostaei
    Journal of Alloys and Compounds, Vol. 957, No 1, 2023
48. "A review of Mg alloys containing long-period stacking ordered (LPSO) structures with insight into the application of friction stir processing"
    Mohammad Saleh Geshani, Parastoo Mahmoud Kalayeh, Amir Hossein Asadi, Hamed Mirzadeh Soltanpour, Mehdi Malekan, Massoud Emamy
    Journal of Materials Research and Technology-JMR&T, Vol. 24, No 1, pp.4945-4966, 2023
49. "Superplasticity of fine-grained magnesium alloys for biomedical applications: A comprehensive review"
    Zeynab Sawaedi, Reza Motallebi, Hamed Mirzadeh Soltanpour, Rouhollah Mehdinavaz Aghdam, Reza Mahmuodi
    Current Opinion in Solid State and Materials Science, Vol. 27, No 2, 2023
50. "Dissolution kinetics of Laves phase during homogenization heat treatment of additively manufactured Inconel 718 superalloy"
    Sajad Ghaemifar, Hamed Mirzadeh Soltanpour
    Journal of Materials Research and Technology-JMR&T, Vol. 24, No 1, 2023
51. "Dependency of work-hardening behavior of a metastable austenitic stainless steel on the nucleation site of deformation-induced martensite"
    Mohammad Javad Sohrabi, Hamed Mirzadeh Soltanpour, Saeed Sadeghpour Galooyak, Reza Mahmuodi
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, Vol. 868, No 1, 2023
52. "Elucidating the effects of cold rolling route on the mechanical properties of AISI 316L austenitic stainless steel"
    Sara Mohammadzehi, Hamed Mirzadeh Soltanpour, Mohammad Javad Sohrabi, Milad Roostaei, Reza Mahmuodi
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, Vol. 865, No 1, 2023
53. "Mechanical Properties and Corrosion Behavior of Biodegradable Mg–0.5Zr–0.5Ca–xZn Magnesium Alloys"
    Fereshteh Ghorbani Anilo, Hamed Mirzadeh Soltanpour, Changiz Dehghanian, Massoud Emamy
    ADVANCED ENGINEERING MATERIALS, Vol. 25, No 10, 2023
54. "Grain size dependent mechanical behavior and TRIP effect in a metastable austenitic stainless steel"
    Mohammad javad Sohrabi, Hamed Mirzadeh Soltanpour, Saeed Sadeghpour, Reza Mahmuodi
    INTERNATIONAL JOURNAL OF PLASTICITY, Vol. 160, No 1, 2023
55. "Microstructure and mechanical properties of as-cast and wrought Mg–Ni in-situ formed alloys"
    Milad Maleki Pirbazari, Fatemeh Jamei, Massoud Emamy, Hamed Mirzadeh Soltanpour
    MATERIALS SCIENCE AND TECHNOLOGY, Vol. 39, No 8, pp.985-993, 2022
56. "Thermal stability, grain growth kinetics, mechanical properties, and bio-corrosion resistance of pure Mg, ZK30, and ZEK300 alloys: A comparative study"
    Zeynab Sawaedi, Hamed Mirzadeh Soltanpour, Rouhollah Mehdinavaz Aghdam, Reza Mahmuodi
    Materials Today Communications, Vol. 33, No 1, 2022
57. "On the solidification characteristics and corrosion resistance of in situ Mg–3Si–xCu composites"
    Milad Maleki, Massoud Emamy, Changiz Dehghanian, Hamed Mirzadeh Soltanpour
    VACUUM, Vol. 206, No 1, 2022
58. "Tailoring the mechanical properties of austempered low-carbon ferritic–bainitic/martensitic dual-phase steel"
    Reza Motallebi, Hamed Mirzadeh Soltanpour
    ARCHIVES OF CIVIL AND MECHANICAL ENGINEERING, Vol. 23, No 1, 2022
59. "Enhancing the elevated temperatures tribological properties of Al–Mg2Si composites by in-situ addition of Ti-based intermetallics and hot working"
    Mohammad Rasool Moazami, Ahmad Razaghian , Ali Moharrami, Hamed Mirzadeh Soltanpour, Massoud Emamy
    Journal of Materials Research and Technology-JMR&T, Vol. 21, No 1, pp.1381-1394, 2022
60. "Post-processing of additively manufactured high-entropy alloys - A review"
    Hasti Khodashenas, Hamed Mirzadeh Soltanpour
    Journal of Materials Research and Technology-JMR&T, Vol. 21, No 1, pp.3795-3814, 2022
61. "Effects of titanium addition on the microstructure and mechanical properties of quaternary CoCrFeNi high entropy alloy"
    Mehrdad Karimzadeh, Mehdi Malekan, Hamed Mirzadeh Soltanpour, L.. Li., N.. Saini
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, Vol. 856, No 1, 2022
62. "Tribological behavior of as-cast and wrought Al–Mg2Si hybrid composites reinforced by Ti-based intermetallics"
    Mohammad Rasool Moazami, Ahmad Razaghian , Hamed Mirzadeh Soltanpour, Massoud Emamy, Ali Moharami
    Journal of Materials Research and Technology-JMR&T, Vol. 20, No 1, pp.1315-1327, 2022
63. "Post-processing heat treatment of lightweight magnesium alloys fabricated by additive manufacturing: a review"
    Reza Motallebi, Zeynab Sawaedi, Hamed Mirzadeh Soltanpour
    Journal of Materials Research and Technology-JMR&T, Vol. 20, No 1, pp.1873-1892, 2022
64. "Heterostructured stainless steel: Properties, current trends, and future perspectives"
    Liliana Romero-Resendiz, M.. El-Tahawy, T.. Zhang, M.C. Rossi, D.M. Marulanda-Cardona, T.. Yang, V.. Amigo-Borras, Y.. Huang, Hamed Mirzadeh Soltanpour, I.J. Beyerlein, J.C. Huang, T.G. Langdon, Y.T. Zhu
    Materials Science and Engineering: R: Reports, Vol. 150, No 1, 2022
65. "Detailed Hall–Petch Analysis of Cold Rolled and Annealed Duplex 2205 Stainless Steel"
    Mohammad Saleh Geshani, Hamed Mirzadeh Soltanpour, Mohammad javad Sohrabi
    STEEL RESEARCH INTERNATIONAL, Vol. 93, No 7, 2022
66. "Effect of grain size on the mechanical properties and bio-corrosion resistance of pure magnesium"
    Zeynab Sawaedi, Hamed Mirzadeh Soltanpour, Rouhollah Mehdinavaz Aghdam, Reza Mahmuodi
    Journal of Materials Research and Technology-JMR&T, Vol. 19, No 1, pp.3100-3109, 2022
67. "Tailoring the tensile properties of AZ91 magnesium alloy via grain refinement"
    Ali Koushki, Ali Heydarinia, Massoud Emamy, Hamed Mirzadeh Soltanpour, Mohammad Sajad Mehranpour
    MATERIALS SCIENCE AND TECHNOLOGY, Vol. 38, No 17, pp.1434-1438, 2022
68. "Enhanced Mechanical Properties of as-cast Rare Earth Bearing Magnesium Alloy Via Elevated-temperature Homogenization"
    Hooman Abedi, Massoud Emamy, Jafar Rasi Zadeh Ghani, Hamed Mirzadeh Soltanpour, M.. Raayatpour
    Materials Today Communications, Vol. 31, No 1, 2022
69. "Effect of Variation of Martensite with a Constant Carbon Content on Mechanical Behavior and Sliding Wear of Dual Phase Steels"
    Mehran Zamani, Hamid Reza Ghasemi Monfared Rad, Hamed Mirzadeh Soltanpour
    TRIBOLOGY LETTERS, Vol. 70, No 3, 2022
70. "Additive manufacturing – A review of hot deformation behavior and constitutive modeling of flow stress"
    Reza Motallebi, Zeynab Sawaedi, Hamed Mirzadeh Soltanpour
    Current Opinion in Solid State and Materials Science, Vol. 26, No 3, 2022
71. "Cold unidirectional/cross-rolling of austenitic stainless steels: a review"
    Sara Mohammadzehi, Hamed Mirzadeh Soltanpour
    ARCHIVES OF CIVIL AND MECHANICAL ENGINEERING, Vol. 22, No 3, 2022
72. "A review of hot deformation behavior and constitutive models to predict flow stress of high-entropy alloys"
    Zeynab Sawaedi, Reza Motallebi, Hamed Mirzadeh Soltanpour
    JOURNAL OF ALLOYS AND COMPOUNDS, Vol. 903, No 1, 2022
73. "Superplasticity of bulk metallic glasses (BMGs): A review"
    Zeynab Sawaedi, Reza Motallebi, Hamed Mirzadeh Soltanpour, Mehdi Malekan
    JOURNAL OF NON-CRYSTALLINE SOLIDS, Vol. 583, No 1, 2022
74. "Mechanical properties of as-cast and wrought Mg–5Ni-xAl magnesium alloys"
    Massoud Emamy, Hamed Mirzadeh Soltanpour, M.. Raayatpour, Hooman Abedi
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, Vol. 840, No 1, 2022
75. "Improvement of mechanical properties of in situ Mg-Si composites via Cu addition and hot working"
    Milad Maleki, Hamed Mirzadeh Soltanpour, Massoud Emamy
    JOURNAL OF ALLOYS AND COMPOUNDS, Vol. 905, No 1, 2022
76. "Tailoring the mechanical properties of hypereutectic in situ Al–Mg2Si composites via hybrid TiB2 reinforcement and hot extrusion"
    Mohammad Rasool Moazami, Ahmad Razaghian , Hamed Mirzadeh Soltanpour, Massoud Emamy
    ARCHIVES OF CIVIL AND MECHANICAL ENGINEERING, Vol. 22, No 2, 2022
77. "Microstructure, mechanical properties, and pitting corrosion resistance of SAF 2205 duplex stainless steel after friction hydro-pillar processing"
    Cleber Rodrigo de Lima Lessa, Guilherme Vieira Braga Lemos, Arlan Pacheco Figueiredo, Douglas Martinazzi, Pedro Henrique Costa Pereira da Cunha, Afonso Reguly, Hamed Mirzadeh Soltanpour
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, Vol. 120, pp.2047-2054, 2022
78. "Microstructures and mechanical performance of Mg–4Si–6Ni–xY in situ composite after extrusion process"
    Iman Salehzadeh-Nobari, Massoud Emamy, M.. Raayatpour, Hamed Mirzadeh Soltanpour
    MATERIALS SCIENCE AND TECHNOLOGY, Vol. 38, No 3, pp.169-180, 2022
79. "Amorphization, mechano-crystallization, and crystallization kinetics of mechanically alloyed AlFeCuZnTi high-entropy alloys"
    Sara Daryoush, Hamed Mirzadeh Soltanpour, Abolghasem Ataei
    MATERIALS LETTERS, Vol. 307, No 1, 2022
80. "Superplasticity of high-entropy alloys: a review"
    Reza Motallebi, Zeynab Sawaedi, Hamed Mirzadeh Soltanpour
    ARCHIVES OF CIVIL AND MECHANICAL ENGINEERING, Vol. 22, No 1, 2021
81. "Microstructure and Mechanical Properties of Dual‐Phase Steels by Combining Adjusted Initial Microstructures and Severe Plastic Deformation"
    Palita Satjabut, Alireza Kalhor, Vitoon Uthaisangsuk, Hamed Mirzadeh Soltanpour
    STEEL RESEARCH INTERNATIONAL, Vol. 93, No 5, 2021
82. "Enhanced mechanical properties of Mg–Ni–xRE alloys via hot extrusion"
    Mahdi Rezaei, Mehdi Malekan, Massoud Emamy, Hamed Mirzadeh Soltanpour
    MATERIALS SCIENCE AND TECHNOLOGY, Vol. 37, No 16, pp.1285-1290, 2021
83. "Synergistic Effects of Cerium-Based Rare Earth Addition and Hot Deformation on the Microstructure and Mechanical Properties of Mg-0.5Zn-0.5Zr Magnesium Alloy"
    Hooman Abedi, Massoud Emamy, Jafar Rasi Zadeh Ghani, Hamed Mirzadeh Soltanpour
    METALS AND MATERIALS INTERNATIONAL, Vol. 28, No 5, pp.1105-1113, 2021
84. "Synergistic effects of alloying, homogenization, and hot extrusion on the mechanical properties of as-cast Mg–Al–Ca magnesium alloys"
    Zahra Nasiri, Hamed Mirzadeh Soltanpour, Mahmoud Sarkari Khorami, Massoud Emamy
    ARCHIVES OF CIVIL AND MECHANICAL ENGINEERING, Vol. 21, No 3, 2021
85. "High strain rate superplasticity via friction stir processing (FSP): A review"
    Hamed Mirzadeh Soltanpour
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, Vol. 819, No 1, 2021
86. "Effect of microalloying by Ca on the microstructure and mechanical properties of as-cast and wrought Mg–Mg2Si composites"
    Mehrab Lotf Pour, Ahmad Bahmani, Hamed Mirzadeh Soltanpour, Massoud Emamy, Mehdi Malekan, W.J. Kim, Milad Taghizadeh, Aria Afsharnaderi
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, Vol. 820, No 1, 2021
87. "Tempering kinetics and corrosion resistance of quenched and tempered AISI 4130 medium carbon steel"
    Aliasghar Mosayebi, Maryam Soleimani, Hamed Mirzadeh Soltanpour, Changiz Dehghanian
    MATERIALS AND CORROSION-WERKSTOFFE UND KORROSION, Vol. 72, No 11, pp.1808-1812, 2021
88. "Nanostructured high-entropy alloys by mechanical alloying: A review of principles and magnetic properties"
    Sara Daryoush, Hamed Mirzadeh Soltanpour, Abolghasem Ataei
    Journal of Ultrafine Grained and Nanostructured Materials, Vol. 54, No 1, pp.112-120, 2021
89. "Enhanced tensile properties of as-cast Mg-10Al magnesium alloy via strontium addition and hot working"
    Fereshteh Ghorbani Anilo, Massoud Emamy, Hamed Mirzadeh Soltanpour
    ARCHIVES OF CIVIL AND MECHANICAL ENGINEERING, Vol. 21, No 2, 2021
90. "Processing, microstructure adjustments, and mechanical properties of dual phase steels: a review"
    Alireza Kalhor, Ali Karimi Taheri, Hamed Mirzadeh Soltanpour, Vitoon Uthaisangsuk
    MATERIALS SCIENCE AND TECHNOLOGY, Vol. 37, No 6, pp.561-591, 2021
91. "Enhanced mechanical properties of as-cast Mg-Al-Ca magnesium alloys by friction stir processing"
    Zahra Nasiri, Mahmoud Sarkari Khorami, Hamed Mirzadeh Soltanpour, Massoud Emamy
    MATERIALS LETTERS, Vol. 296, No 1, 2021
92. "Recent advances in the kinetics of normal/abnormal grain growth: a review"
    Fateme Najafkhani, Sara Kheiri, Bita Pourbahari, Hamed Mirzadeh Soltanpour
    ARCHIVES OF CIVIL AND MECHANICAL ENGINEERING, Vol. 21, No 1, 2021
93. "Delta processing effects on the creep behavior of a typical Nb-bearing nickel-based superalloy"
    Mohsen Rafiei, Hamed Mirzadeh Soltanpour, Mehdi Malekan
    VACUUM, Vol. 184, No 1, 2021
94. "Enhanced mechanical properties of dual phase steel via cross rolling and intercritical annealing"
    Maryam Soleimani, Hamed Mirzadeh Soltanpour
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, Vol. 804, No 1, 2021
95. "Finite element analysis of plastic deformation in shear punch test"
    Aqil Zergani moqarrab, Hamed Mirzadeh Soltanpour, Reza Mahmuodi
    MATERIALS LETTERS, Vol. 284, No 1, 2021
96. "Mechanical response of a metastable austenitic stainless steel under different deformation modes"
    Aqil Zergani moqarrab, Hamed Mirzadeh Soltanpour, Reza Mahmuodi
    MATERIALS SCIENCE AND TECHNOLOGY, Vol. 37, No 1, pp.1-7, 2021
97. "Effects of spheroidization heat treatment and intercritical annealing on mechanical properties and corrosion resistance of medium carbon dual phase steel"
    Maryam Soleimani, Hamed Mirzadeh Soltanpour, Changiz Dehghanian
    MATERIALS CHEMISTRY AND PHYSICS, Vol. 257, No 1, 2021
98. "Enhanced mechanical properties of AZ91 magnesium alloy by inoculation and hot deformation"
    Mohammadsajjad Mehranpour, Ali Heydarinia, Massoud Emamy, Hamed Mirzadeh Soltanpour, Ali Koushki, Ramin Razi
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, Vol. 802, No 1, 2021
99. "Ultrafine grained Fe-Cr-Ni austenitic stainless steels by cold rolling and reversion annealing: A review of progress in Iran"
    Meysam Naghizadeh, Mohammad Javad Sohrabi, Hamed Mirzadeh Soltanpour
    Journal of Ultrafine Grained and Nanostructured Materials, Vol. 53, No 2, pp.210-223, 2020
100. "Mechanical alloying and consolidation of copper‐iron‐silicon carbide nanocomposites"
     Mina Rabiee, Hamed Mirzadeh Soltanpour, Abolghasem Ataei
     MATERIALWISSENSCHAFT UND WERKSTOFFTECHNIK, Vol. 51, No 12, pp.1700-1704, 2020
101. "Mechanical Behavior of As-Cast and Extruded Mg-Si-Ni-Ca Magnesium Alloys"
     Omid Marjani, Massoud Emamy, Hamed Mirzadeh Soltanpour
     JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, Vol. 29, No 11, pp.7728-7735, 2020
102. "A dislocation assisted self-consistent constitutive model for the high-temperature deformation of particulate metal-matrix composite"
     Mohammad Rezayat, Mohammad Habibi Parsa, Hamed Mirzadeh Soltanpour, Jose Maria Cabrera
     PHILOSOPHICAL MAGAZINE, Vol. 101, No 3, pp.276-305, 2020
103. "Utilization of Microalloying with Rare Earth Elements and Hot Extrusion for Remarkable Grain Refinement and Enhancement of Mechanical Properties of as-Cast Magnesium Alloy"
     Hooman Abedi, Massoud Emamy, Hamed Mirzadeh Soltanpour, Jafar Rasi Zadeh Ghani, M.. Raayatpour
     Journal of Advanced Materials and Processing, Vol. 8, No 4, pp.29-34, 2020
104. "Deformation-induced martensite in austenitic stainless steels: A review"
     Mohammad Javad Sohrabi, Meysam Naghizadeh, Hamed Mirzadeh Soltanpour
     ARCHIVES OF CIVIL AND MECHANICAL ENGINEERING, Vol. 20, No 4, 2020
105. "Improved properties of dual-phase steel via pre-intercritical annealing treatment and thermal cycling"
     Sajad Ghaemifar, Hamed Mirzadeh Soltanpour, Mahmoud Sarkari Khorami, Reza Soltani, Zahra Nasiri
     MATERIALS SCIENCE AND TECHNOLOGY, Vol. 36, No 15, pp.1663-1670, 2020
106. "Hot deformation behavior and flow stress modeling of Ti–6Al–4V alloy produced via electron beam melting additive manufacturing technology in single β-phase field"
     Abdollah Saboori, Ata Abdi, Seyed Ali Fatemi, Giulio Marchese, Sara Biamino, Hamed Mirzadeh Soltanpour
     MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, Vol. 792, No 1, 2020
107. "Transformation-induced plasticity (TRIP) in advanced steels: A review"
     Maryam Soleimani, Alireza Kalhor, Hamed Mirzadeh Soltanpour
     MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, Vol. 795, No 1, 2020
108. "Enhanced mechanical properties of as-cast AZ91 magnesium alloy by combined RE-Sr addition and hot extrusion"
     Aria Afsharnaderi, Mehrab Lotfpour, Hamed Mirzadeh Soltanpour, Massoud Emamy, Mehdi Malekan
     MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, Vol. 792, No 1, 2020
109. "A review of recent progress in mechanical and corrosion properties of dual phase steels"
     Alireza Kalhor, Maryam Soleimani, Hamed Mirzadeh Soltanpour, Vitoon Uthaisangsuk
     ARCHIVES OF CIVIL AND MECHANICAL ENGINEERING, Vol. 20, No 3, 2020
110. "Evolutions of mechanical properties of AISI 304L stainless steel under shear loading"
     Aqil Zergani moqarrab, Hamed Mirzadeh Soltanpour, Reza Mahmuodi
     MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, Vol. 791, No 1, 2020
111. "Two-step annealing treatment for grain refinement of cold-worked AISI 316L stainless steel"
     Kamyar Sharifian, Hamed Mirzadeh Soltanpour, Sara Kheiri, Meysam Naghizadeh
     INTERNATIONAL JOURNAL OF MATERIALS RESEARCH, Vol. 111, No 7, 2020
112. "Crystallization kinetics of mechanically alloyed amorphous Fe-Ti alloys during annealing"
     Reyhane Adelfar, Hamed Mirzadeh Soltanpour, Abolghasem Ataei, Mehdi Malekan
     ADVANCED POWDER TECHNOLOGY, Vol. 31, No 1, 2020
113. "Unraveling the Effect of Deformation Temperature on the Mechanical Behavior and Transformation‐Induced Plasticity of the SUS304L Stainless Steel"
     Aqil Zergani moqarrab, Hamed Mirzadeh Soltanpour, Reza Mahmuodi
     STEEL RESEARCH INTERNATIONAL, Vol. 91, No 8, 2020
114. "Elucidating the effects of microsegregation on the precipitation phenomena in as-cast Nb-bearing superalloy"
     Mohsen Rafiei, Hamed Mirzadeh Soltanpour, Mohammad Javad Sohrabi
     MATERIALS LETTERS, Vol. 266, No 1, 2020
115. "Precipitation kinetics of γ″ phase and its mechanism in a Nb-bearing nickel-based superalloy during aging"
     Mohsen Rafiei, Hamed Mirzadeh Soltanpour, Mehdi Malekan
     VACUUM, Vol. 178, No 1, 2020
116. "Microstructure and Mechanical Properties of Cold Rolled AISI 304L and 316L Austenitic Stainless Steels during Reversion Annealing"
     Mohammad Javad Sohrabi, Hamed Mirzadeh Soltanpour, Changiz Dehghanian
     Iranian Journal of Materials Forming, Vol. 7, No 1, pp.92-99, 2020
117. "Significance of Martensite Reversion and Austenite Stability to the Mechanical Properties and Transformation-Induced Plasticity Effect of Austenitic Stainless Steels"
     Mohammad Javad Sohrabi, Hamed Mirzadeh Soltanpour, Changiz Dehghanian
     JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, Vol. 29, No 5, pp.3233-3242, 2020
118. "Thermal Mechanisms of Grain Refinement in Steels: A Review"
     Zahra Nasiri, Sajad Ghaemifar, Meysam Naghizadeh, Hamed Mirzadeh Soltanpour
     METALS AND MATERIALS INTERNATIONAL, Vol. 26, No 8, 2020
119. "Thermodynamics basis of saturation of martensite content during reversion annealing of cold rolled metastable austenitic steel"
     Mohammad javad Sohrabi, Hamed Mirzadeh Soltanpour, Changiz Dehghanian
     VACUUM, Vol. 174, No 1, 2020
120. "Effects of hot rolling and homogenisation treatment on low alloy steel ingot"
     Mahdiyeh Baharvand, Amir Zanganeh, Hamed Mirzadeh Soltanpour, Mohammad Habibi Parsa
     MATERIALS SCIENCE AND TECHNOLOGY, Vol. 36, No 7, pp.835-842, 2020
121. "Phase Transformation Kinetics During Annealing of Cold-Rolled AISI 309Si Stainless Steel"
     Ata Abdi, Hamed Mirzadeh Soltanpour, Mohammad Javad Sohrabi, Meysam Naghizadeh
     METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, Vol. 51, No 5, 2020
122. "Unraveling the effects of surface preparation on the pitting corrosion resistance of austenitic stainless steel"
     Mohammad Javad Sohrabi, Hamed Mirzadeh Soltanpour, Changiz Dehghanian
     ARCHIVES OF CIVIL AND MECHANICAL ENGINEERING, Vol. 20, No 1, 2020
123. "Tempering of Cold-Rolled Martensite in Mild Steel and Elucidating the Effects of Alloying Elements"
     Arsalan Ajami, Hamed Mirzadeh Soltanpour, Mostafa Najafi
     JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, Vol. 29, No 2, 2020
124. "Tailoring the mechanical properties of Mg–Zn magnesium alloy by calcium addition and hot extrusion process"
     Zahra Zareian Gahromi, Massoud Emamy, Mehdi Malekan, Hamed Mirzadeh Soltanpour, W.J. Kim, Ahmad Bahmani
     MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, Vol. 774, No 1, 2020
125. "Unexpected formation of delta (δ) phase in as-cast niobium-bearing superalloy at solution annealing temperatures"
     Mohammad javad Sohrabi, Hamed Mirzadeh Soltanpour
     MATERIALS LETTERS, Vol. 261, No 1, 2020
126. "Effect of grain size on the corrosion resistance of low carbon steel"
     Maryam Soleimani, Hamed Mirzadeh Soltanpour, Changiz Dehghanian
     Materials Research Express, Vol. 7, No 1, 2020
127. "Static recrystallization kinetics of ferrite in cold-deformed medium carbon steel"
     Mohammad Tavakoli, Hamed Mirzadeh Soltanpour, Mehran Zamani
     Materials Research Express, Vol. 6, No 1, 2020
128. "Effect of Zn addition on the microstructure and mechanical properties of Mg-0.5Ca-0.5RE magnesium alloy"
     Mahbod Golrang, Mohammad Mobasheri, Hamed Mirzadeh Soltanpour, Massoud Emamy
     JOURNAL OF ALLOYS AND COMPOUNDS, Vol. 815, No 1, 2020
129. "Estimation of homogenisation time for superalloys based on a new diffusional model"
     Mohammad javad Sohrabi, Hamed Mirzadeh Soltanpour
     MATERIALS SCIENCE AND TECHNOLOGY, Vol. 36, No 3, pp.380-384, 2019
130. "Quantifying the dependency of uniform corrosion of structural steel on grain size"
     Maryam Soleimani, Hamed Mirzadeh Soltanpour, Changiz Dehghanian
     Journal of Ultrafine Grained and Nanostructured Materials, Vol. 52, No 2, pp.206-209, 2019
131. "Numerical and analytical solutions for determination of interdiffusion coefficients in superalloys during homogenization"
     Mohammad Javad Sohrabi, Hamed Mirzadeh Soltanpour
     Materials Today Communications, Vol. 21, No 1, 2019
132. "Constitutive modeling of flow stress during hot deformation of Sn–Al–Zn–Cu–Mg multi-principal-element alloy"
     Hasti Khodashenas, Hamed Mirzadeh Soltanpour, Mehdi Malekan, Massoud Emamy
     VACUUM, Vol. 170, No 1, 2019
133. "Microstructure tailoring for property improvements of DP steel via cyclic intercritical annealing"
     Seyedeh yasamin Khebreh farshchi, Hamed Mirzadeh Soltanpour, Mohammad Tavakoli, Mehran Zamani
     Materials Research Express, Vol. 6, No 12, 2019
134. "Grain refinement and Hall-Petch strengthening of magnesium alloy via alloying and hot extrusion"
     Marjan Razzaghi kashani, Hamed Mirzadeh Soltanpour, Massoud Emamy
     Iranian Journal of Materials Forming, Vol. 6, No 2, pp.2-9, 2019
135. "Unraveling the Effect of Martensite Volume Fraction on the Mechanical and Corrosion Properties of Low‐Carbon Dual‐Phase Steel"
     Maryam Soleimani, Hamed Mirzadeh Soltanpour, Changiz Dehghanian
     STEEL RESEARCH INTERNATIONAL, Vol. 91, No 2, 2019
136. "Effects of tempering on the mechanical and corrosion properties of dual phase steel"
     Maryam Soleimani, Hamed Mirzadeh Soltanpour, Changiz Dehghanian
     Materials Today Communications, Vol. 25, No 1, 2019
137. "Interdiffusion coefficients of alloying elements in a typical Ni-based superalloy"
     Mohammad Javad Sohrabi, Hamed Mirzadeh Soltanpour
     VACUUM, Vol. 169, No 1, 2019
138. "Phase transformation mechanism and kinetics during step quenching of st37 low carbon steel"
     Maryam Soleimani, Hamed Mirzadeh Soltanpour, Changiz Dehghanian
     Materials Research Express, Vol. 6, No 11, 2019
139. "Effect of Gd on Dynamic Recrystallization Behavior of Magnesium During Hot Compression"
     Mohammad Hossein Barezban, Reza Roumina, Hamed Mirzadeh Soltanpour, Reza Mahmuodi
     METALS AND MATERIALS INTERNATIONAL, Vol. 25, No 25, 2019
140. "Evaluating the Effect of Hot‐Rolling Reduction on the Mechanical Properties of In Situ Formed Aluminum–Magnesium–Silicon (Al‐Mg 2 Si) Composites"
     Rashadoddin Zamani, Hamed Mirzadeh Soltanpour, Massoud Emamy
     ADVANCED ENGINEERING MATERIALS, Vol. 21, No 12, 2019
141. "Processing Route Effects on the Mechanical and Corrosion Properties of Dual Phase Steel"
     Maryam Soleimani, Hamed Mirzadeh Soltanpour, Changiz Dehghanian
     METALS AND MATERIALS INTERNATIONAL, Vol. 26, No 6, 2019
142. "Grain refinement and enhanced mechanical properties of ZK20 magnesium alloy via hot extrusion and mischmetal addition"
     Ehsan Fathi, Hamed Mirzadeh Soltanpour, Massoud Emamy
     Materials Research Express, Vol. 6, No 11, 2019
143. "Improved Mechanical Properties of Structural Steel via Developing Bimodal Grain Size Distribution and Intercritical Heat Treatment"
     Mostafa Najafi, Hamed Mirzadeh Soltanpour, Mohammad Alibeyki
     JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, Vol. 28, No 9, 2019
144. "Ferrite recrystallisation and intercritical annealing of cold-rolled low alloy medium carbon steel"
     Mohammad Tavakoli, Hamed Mirzadeh Soltanpour, Mehran Zamani
     MATERIALS SCIENCE AND TECHNOLOGY, Vol. 35, No 16, pp.1932-1941, 2019
145. "Amorphization and mechano-crystallization of high-energy ball milled Fe Ti alloys"
     Reyhane Adelfar, Hamed Mirzadeh Soltanpour, Abolghasem Ataei, Mehdi Malekan
     JOURNAL OF NON-CRYSTALLINE SOLIDS, Vol. 520, No 1, 2019
146. "Unraveling the effects of Zn addition and hot extrusion process on the microstructure and mechanical properties of as-cast Mg–2Al magnesium alloy"
     Marjan Razzaghi kashani, Hamed Mirzadeh Soltanpour, Massoud Emamy
     VACUUM, Vol. 167, No 1, pp.214-222, 2019
147. "Dependency of Natural Aging on the Ferritfoe Grain Size in Dual-Phase Steel"
     Mehran Zamani, Hamed Mirzadeh Soltanpour, Hamid Reza Ghasemi Monfared Rad
     METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, Vol. 50, No 12, 2019
148. "Mechanical properties of Mg-Al-Mn magnesium alloys with low Al content in the as-cast and extruded conditions"
     Marjan Razzaghi kashani, Hamed Mirzadeh Soltanpour, Massoud Emamy
     Materials Research Express, Vol. 6, No 10, 2019
149. "Toward understanding the origins of poor ductility in a metal-matrix composite processed by accumulative roll bonding (ARB)"
     Mahsa Gharechomaghlu, Hamed Mirzadeh Soltanpour
     ARCHIVES OF CIVIL AND MECHANICAL ENGINEERING, Vol. 19, No 4, pp.958-966, 2019
150. "Texture development during hot deformation of Al/Mg alloy reinforced with ceramic particles"
     Mohammad Rezayat, Mohammad Habibi Parsa, Hamed Mirzadeh Soltanpour, Jose Maria Cabrera
     JOURNAL OF ALLOYS AND COMPOUNDS, Vol. 798, pp.267-272, 2019
151. "Aging kinetics and mechanical properties of copper-bearing low-carbon HSLA-100 microalloyed steel"
     Mohammad Javad Sohrabi, Hamed Mirzadeh Soltanpour, Mohammad Sajad Mehranpour, Ali Heydarinia, Ramin Razi
     ARCHIVES OF CIVIL AND MECHANICAL ENGINEERING, Vol. 19, No 4, pp.1409-1418, 2019
152. "Effects of Grain Size on Mechanical Properties and Work‐Hardening Behavior of AISI 304 Austenitic Stainless Steel"
     Meysam Naghizadeh, Hamed Mirzadeh Soltanpour
     STEEL RESEARCH INTERNATIONAL, Vol. 91, No 1, 2019
153. "Revisiting the Diffusion of Niobium in an As-Cast Nickel-Based Superalloy During Annealing at Elevated Temperatures"
     Mohammad Javad Sohrabi, Hamed Mirzadeh Soltanpour
     METALS AND MATERIALS INTERNATIONAL, Vol. 26, No 1, 2019
154. "Homogenization kinetics of a typical nickel-based superalloy"
     Mohsen Rafiei, Hamed Mirzadeh Soltanpour, Mehdi Malekan, Mohammad javad Sohrabi
     JOURNAL OF ALLOYS AND COMPOUNDS, Vol. 793, No 1, pp.277-282, 2019
155. "Micro-mechanisms and precipitation kinetics of delta (δ) phase in Inconel 718 superalloy during aging"
     Mohsen Rafiei, Hamed Mirzadeh Soltanpour, Mehdi Malekan
     JOURNAL OF ALLOYS AND COMPOUNDS, Vol. 795, No 1, pp.207-212, 2019
156. "Effect of Si and Ni on microstructure and mechanical properties of in-situ magnesium-based composites in the as-cast and extruded conditions"
     Amir Reza Salasel, Alireza Abasi, Nima Barri, Hamed Mirzadeh Soltanpour, Massoud Emamy, Mehdi Malekan
     MATERIALS CHEMISTRY AND PHYSICS, Vol. 232, No 1, pp.305-310, 2019
157. "Tailoring the microstructure and mechanical properties of AISI 316L austenitic stainless steel via cold rolling and reversion annealing"
     Sara Kheiri, Hamed Mirzadeh Soltanpour, Meysam Naghizadeh
     MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, Vol. 759, No 1, pp.90-96, 2019
158. "A new intermetallic phase formation in Mg Si Ni magnesium-based in-situ formed alloys"
     Nima Barri, Amir Reza Salasel, Alireza Abasi, Hamed Mirzadeh Soltanpour, Massoud Emamy, Mehdi Malekan
     VACUUM, Vol. 164, No 1, pp.349-354, 2019
159. "Constitutive analysis of wrought Mg-Gd magnesium alloys during hot compression at elevated temperatures"
     Mohamad hosein Barezban, Hamed Mirzadeh Soltanpour, Reza Roumina, Reza Mahmuodi
     JOURNAL OF ALLOYS AND COMPOUNDS, Vol. 791, No 1, pp.1200-1206, 2019
160. "Improved mechanical properties of mild steel via combination of deformation, intercritical annealing, and quench aging"
     Sheida Nikkhah fini, Hamed Mirzadeh Soltanpour, Mehran Zamani
     MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, Vol. 756, No 1, pp.268-271, 2019
161. "Fine tuning the mechanical properties of dual phase steel via thermomechanical processing of cold rolling and intercritical annealing"
     Sheida Nikkhah fini, Hamed Mirzadeh Soltanpour, Mehran Zamani
     MATERIALS CHEMISTRY AND PHYSICS, Vol. 230, No 1, pp.1-8, 2019
162. "Revealing the As-Cast and Homogenized Microstructures of Niobium-Bearing Nickel-Based Superalloy"
     Mohammad javad Sohrabi, Hamed Mirzadeh Soltanpour, Mohsen Rafiei
     International Journal of Metalcasting, Vol. 13, No 2, pp.320-330, 2019
163. "Effect of Intercritical Annealing Time at Pearlite Dissolution Finish Temperature (Ac1f) on Mechanical Properties of Low-Carbon Dual-Phase Steel"
     Mehdi Maleki, Hamed Mirzadeh Soltanpour, Mehran Zamani
     JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, Vol. 28, No 4, pp.2178-2183, 2019
164. "Tempering of deformed and as-quenched martensite in structural steel"
     Mostafa Najafi, Hamed Mirzadeh Soltanpour, Mohammad Alibeyki
     Journal of Mining and Metallurgy Section B-Metallurgy, Vol. 55, No 1, pp.95-99, 2019
165. "Synergistic effects of holding time at intercritical annealing temperature and initial microstructure on the mechanical properties of dual phase steel"
     Fatemeh Jameiy, Hamed Mirzadeh Soltanpour, Mehran Zamani
     MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, Vol. 750, No 1, pp.125-131, 2019
166. "Effect of Intercritical Annealing Conditions on Grain Growth Kinetics of Dual Phase Steel"
     Fateme Najafkhani, Hamed Mirzadeh Soltanpour, Mehran Zamani
     METALS AND MATERIALS INTERNATIONAL, Vol. 25, No 4, 2019
167. "Enhancement of the microstructure and elevated temperature mechanical properties of as-cast Mg‑Al2Ca‑Mg2Ca in-situ composite by hot extrusion"
     Farzaneh Khorasani, Massoud Emamy, Mehdi Malekan, Hamed Mirzadeh Soltanpour, Bita Pourbahari, Tomas Krajnak, Peter Minarik
     MATERIALS CHARACTERIZATION, Vol. 147, No 1, pp.155-164, 2019
168. "Spheroidization heat treatment and intercritical annealing of low carbon steel"
     Zahra Nasiri, Hamed Mirzadeh Soltanpour
     Journal of Mining and Metallurgy Section B-Metallurgy, Vol. 55, pp.33-33, 2019
169. "Enhancement of mechanical properties of low carbon steel based on heat treatment and thermo-mechanical processing routes"
     Mohsen Balavar, Hamed Mirzadeh Soltanpour
     Journal of Ultrafine Grained and Nanostructured Materials, Vol. 51, No 2, pp.169-173, 2018
170. "Processing of Fine-Grained DP300/600 Dual Phase Steel from St12 Structural Steel by the Thermo-Mechanical Processing of Cold Rolling and Intercritical Annealing"
     Mahsa Nouroozi ghale teymoori, Hamed Mirzadeh Soltanpour, Mehran Zamani
     International Journal of Iron and Steel Society of Iran, Vol. 15, No 2, pp.12-17, 2018
171. "Computational evaluation of the homogeneity of composites processed by accumulative roll bonding (ARB)"
     Mahsa Gharechomaghlu, Hamed Mirzadeh Soltanpour
     Journal of Computational and Applied Research in Mechanical Engineering, Vol. 9, No 2, 2018
172. "Modeling the kinetics of deformation-induced martensitic transformation in AISI 316 metastable austenitic stainless steel"
     Meysam Naghizadeh, Hamed Mirzadeh Soltanpour
     VACUUM, Vol. 157, No 1, pp.243-248, 2018
173. "The effects of primary thermo-mechanical processing routes and intercritical annealing on the mechanical properties of st37 low carbon steel"
     Mohammad Alibeyki, Hamed Mirzadeh Soltanpour, Mostafa Najafi
     KOVOVE MATERIALY-METALLIC MATERIALS, Vol. 56, No 5, pp.297-303, 2018
174. "Contribution of Different Hardening Mechanisms during Cold Working of AISI 304L Austenitic Stainless Steel"
     Tina Mirzaie, Hamed Mirzadeh Soltanpour, Meysam Naghizadeh
     ARCHIVES OF METALLURGY AND MATERIALS, Vol. 63, No 3, pp.1317-1320, 2018
175. "Effect of microstructural refinement and intercritical annealing time on mechanical properties of high-formability dual phase steel"
     Mahsa Nouroozi, Hamed Mirzadeh Soltanpour, Mehran Zamani
     MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, Vol. 736, No 1, pp.22-26, 2018
176. "Microstructural investigation of Al-Mg/B 4 C composite deformed at elevated temperature"
     Mohammad Rezayat, Mohammad Habibi Parsa, Hamed Mirzadeh Soltanpour, Jose Maria Cabrera
     JOURNAL OF ALLOYS AND COMPOUNDS, Vol. 763, No 1, pp.643-651, 2018
177. "Enhancement of mechanical properties of low carbon dual phase steel via natural aging"
     Mehran Zamani, Hamed Mirzadeh Soltanpour, Mehdi Maleki
     MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, Vol. 734, No 1, pp.178-183, 2018
178. "Enhancement of work-hardening behavior of dual phase steel by heat treatment"
     Zahra Nasiri, Hamed Mirzadeh Soltanpour
     MATERIALWISSENSCHAFT UND WERKSTOFFTECHNIK, Vol. 49, No 9, pp.1081-1086, 2018
179. "Developing constitutive equations of flow stress for hot deformation of AZ31 magnesium alloy under compression, torsion, and tension"
     Hamed Mirzadeh Soltanpour
     INTERNATIONAL JOURNAL OF MATERIAL FORMING, Vol. 12, No 4, 2018
180. "Improvement of Mechanical Properties and Work-Hardening Behavior of Intercritically Annealed Dual Phase Steel"
     Mehran Zamani, Hamed Mirzadeh Soltanpour, Mehdi Maleki, Fatemeh Jamei
     International Journal of Iron and Steel Society of Iran, Vol. 15, No 1, pp.28-32, 2018
181. "Solidification behavior and Laves phase dissolution during homogenization heat treatment of Inconel 718 superalloy"
     Mohammad Sohrabi, Hamed Mirzadeh Soltanpour, Rahim Rafiei
     VACUUM, Vol. 154, No 1, pp.235-243, 2018
182. "Grain Refinement of Dual Phase Steel via Tempering of Cold-Rolled Martensite"
     Mostafa Najafi, Hamed Mirzadeh Soltanpour, Mohammad Alibeyki
     Iranian Journal of Materials Forming, Vol. 5, No 1, pp.19-25, 2018
183. "Fine-grained dual phase steel via intercritical annealing of cold-rolled martensite"
     Mohammad Alibeyki, Hamed Mirzadeh Soltanpour, Mostafa Najafi
     VACUUM, Vol. 155, No 9, 2018
184. "Magnificent Grain Refinement of Al-Mg2Si Composite by Hot Rolling"
     Rashadoddin Zamani, Hamed Mirzadeh Soltanpour, Massoud Emamy
     Journal of Ultrafine Grained and Nanostructured Materials, Vol. 51, No 1, pp.71-76, 2018
185. "Processing of fine grained AISI 304L austenitic stainless steel by cold rolling and high-temperature short-term annealing"
     Meysam Naghizadeh, Hamed Mirzadeh Soltanpour
     Materials Research Express, Vol. 5, No 5, 2018
186. "Mechanical properties of a hot deformed Al-Mg 2 Si in-situ composite"
     Rashadoddin Zamani, Hamed Mirzadeh Soltanpour, Massoud Emamy
     MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, Vol. 726, No 1, pp.10-17, 2018
187. "Enhanced Ductility of a Fine-Grained Mg-Gd-Al-Zn Magnesium Alloy by Hot Extrusion"
     Bita Pourbahari, Hamed Mirzadeh Soltanpour, Massoud Emamy, Reza Roumina
     ADVANCED ENGINEERING MATERIALS, Vol. 20, No 5, 2018
188. "Effect of Intercritical Annealing on Mechanical Properties and Work-Hardening Response of High Formability Dual Phase Steel"
     Mehdi Maleki, Hamed Mirzadeh Soltanpour, Mehran Zamani
     STEEL RESEARCH INTERNATIONAL, Vol. 89, No 4, 2018
189. "Refinement of Banded Structure via Thermal Cycling and Its Effects on Mechanical Properties of Dual Phase Steel"
     Sajad Ghaemifar, Hamed Mirzadeh Soltanpour
     STEEL RESEARCH INTERNATIONAL, Vol. 89, No 6, 2018
190. "Microstructural Evolutions During Reversion Annealing of Cold-Rolled AISI 316 Austenitic Stainless Steel"
     Meysam Naghizadeh, Hamed Mirzadeh Soltanpour
     METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, Vol. 49, No 6, pp.2248-2256, 2018
191. "The Effects of Grain Refinement and Rare Earth Intermetallics on Mechanical Properties of As-Cast and Wrought Magnesium Alloys"
     Bita Pourbahari, Hamed Mirzadeh Soltanpour, Massoud Emamy
     JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, Vol. 27, No 3, pp.1327-1333, 2018
192. "Controlling the mechanical properties of carbon steel by thermomechanical treatment"
     Mohsen Balavar, Hamed Mirzadeh Soltanpour
     AIP Conference Proceedings, Vol. 1920, No 1, 2018
193. "Dynamic deformation response of Al-Mg and Al-Mg/B 4 C composite at elevated temperatures"
     Mohammad Rezayat, Mohammad Habibi Parsa, Hamed Mirzadeh Soltanpour, Jose Maria Cabrera
     MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, Vol. 712, No 1, pp.645-654, 2018
194. "Grain Refinement and Enhancement of Mechanical Properties of Hot Extruded Rare-Earth Containing Magnesium Alloy"
     Bita Pourbahari, Hamed Mirzadeh Soltanpour, Massoud Emamy
     Journal of Ultrafine Grained and Nanostructured Materials, Vol. 50, No 2, pp.132-136, 2017
195. "Enhanced mechanical properties of dual-phase steel by repetitive intercritical annealing"
     Sajad Ghaemifar, Hamed Mirzadeh Soltanpour
     CANADIAN METALLURGICAL QUARTERLY, Vol. 56, No 4, pp.459-463, 2017
196. "Unraveling the Initial Microstructure Effects on Mechanical Properties and Work-Hardening Capacity of Dual-Phase Steel"
     Hamed Mirzadeh Soltanpour, Mohammad Alibeyki, Mostafa Najafi
     METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, Vol. 48, No 10, 2017
197. "Elucidating the effect of intermetallic compounds on the behavior of Mg–Gd–Al–Zn magnesium alloys at elevated temperatures"
     Bita Pourbahari, Hamed Mirzadeh Soltanpour, Massoud Emamy
     JOURNAL OF MATERIALS RESEARCH, Vol. 32, No 22, pp.4186-4195, 2017
198. "Tailoring the Microstructure and Mechanical Properties of Dual Phase Steel Based on the Initial Microstructure"
     Alireza Kalhor, Hamed Mirzadeh Soltanpour
     STEEL RESEARCH INTERNATIONAL, Vol. 88, No 8, 2017
199. "Effect of Drawing Strain on Development of Martensitic Transformation and Mechanical Properties in AISI 304L Stainless Steel Wire"
     Pouyan Parnian, Mohammad Habibi Parsa, Hamed Mirzadeh Soltanpour, Hamidreza Jafarian
     STEEL RESEARCH INTERNATIONAL, Vol. 88, No 8, 2017
200. "Accumulative Roll Bonding of Aluminum/Stainless Steel Sheets"
     Navid Mohammad Nejad Fard, Hamed Mirzadeh Soltanpour, Mohammad Rezayat, Jose Maria Cabrera
     Journal of Ultrafine Grained and Nanostructured Materials, Vol. 50, No 1, pp.1-5, 2017
201. "Processing of Cu-Fe and Cu-Fe-SiC nanocomposites by mechanical alloying"
     Mina Rabiee, Hamed Mirzadeh Soltanpour, Abolghasem Ataei
     ADVANCED POWDER TECHNOLOGY, Vol. 28, No 8, 2017
202. "Modification of Rule of Mixtures for Estimation of the Mechanical Properties of Dual-Phase Steels"
     Mohammad Alibeyki, Hamed Mirzadeh Soltanpour, Mostafa Najafi, Alireza Kalhor
     JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, Vol. 26, No 6, pp.2683-2688, 2017
203. "Synergistic effect of Al and Gd on enhancement of mechanical properties of magnesium alloys"
     Bita Pourbahari, Massoud Emamy, Hamed Mirzadeh Soltanpour
     Progress in Natural Science-Materials International, Vol. 27, No 2, pp.228-235, 2017
204. "Toward unraveling the effects of intermetallic compounds on the microstructure and mechanical properties of Mg–Gd–Al–Zn magnesium alloys in the as-cast, homogenized, and extruded conditions"
     Bita Pourbahari, Hamed Mirzadeh Soltanpour, Massoud Emamy
     MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, Vol. 680, No 680, pp.39-46, 2017
205. "Modification of As-cast Al-Mg/B4C composite by addition of Zr"
     Mohammad Rezayat, Mohammad Reza Bahremand, Mohammad Habibi Parsa, Hamed Mirzadeh Soltanpour, Jose Maria Cabrera
     JOURNAL OF ALLOYS AND COMPOUNDS, Vol. 685, No 685, pp.70-77, 2016
206. "Prevention of surface hot shortness, development of banded structure, and mechanical properties of hot rolled Cu-bearing steel"
     Saeed Deldar, Hamed Mirzadeh Soltanpour, Mohammad Habibi Parsa
     ENGINEERING FAILURE ANALYSIS, Vol. 68, No 68, pp.132-137, 2016
207. "Toward Unraveling the Importance of Deformed Microstructure before TRIP Heat Treatment in Transformation-Induced Plasticity Steels"
     Saeed Deldar Kudehi, Hamed Mirzadeh Soltanpour, Mohammad Habibi Parsa
     STEEL RESEARCH INTERNATIONAL, Vol. 88, No 5, 2016
208. "Elucidating the Effect of Alloying Elements on the Behavior of Austenitic Stainless Steels at Elevated Temperatures"
     Meysam Naghizadeh, Hamed Mirzadeh Soltanpour
     METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, Vol. 47, No 12, pp.5698-5703, 2016
209. "Microstructural evolution and grain growth kinetics of GZ31 magnesium alloy"
     Milad Roostaei, Mohammad Shirdel, Mohammad Habibi Parsa, Reza Mahmuodi, Hamed Mirzadeh Soltanpour
     MATERIALS CHARACTERIZATION, Vol. 118, No 1, pp.584-592, 2016
210. "Microstructural Evolution of Roll Bonded Al-Clad Stainless Steel Sheets at Elevated Temperatures"
     Hamid Reza Akramifard, Hamed Mirzadeh Soltanpour, Mohammad Habibi Parsa
     International Journal of Iron and Steel Society of Iran, Vol. 13, No 1, pp.38-44, 2016
211. "Unraveling the Effect of Homogenization Treatment on Decomposition of Austenite and Mechanical Properties of Low-Alloyed TRIP Steel"
     Ghavam Azizi, Hamed Mirzadeh Soltanpour, Mohammad Habibi Parsa
     STEEL RESEARCH INTERNATIONAL, Vol. 87, No 7, pp.820-823, 2016
212. "Toward unraveling the mechanisms responsible for the formation of ultrafine grained microstructure during tempering of cold rolled martensite"
     Mostafa Najafi, Hamed Mirzadeh Soltanpour, Mohammad Alibeyki
     MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, Vol. 670, No 670, pp.252-255, 2016
213. "Microstructural Evolutions During Annealing of Plastically Deformed AISI 304 Austenitic Stainless Steel: Martensite Reversion, Grain Refinement, Recrystallization, and Grain Growth"
     Meysam Naghizadeh, Hamed Mirzadeh Soltanpour
     METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, Vol. 47, No 8, pp.4210-4216, 2016
214. "Unraveling the Efects of Process Control Agents on Mechanical Alloying of Nanostructured Cu-Fe Alloy"
     Mina Rabiee, Hamed Mirzadeh Soltanpour, Abolghasem Ataei
     Journal of Ultrafine Grained and Nanostructured Materials, Vol. 49, No 1, pp.17-21, 2016
215. "Grain Refinement Efficiency of Multi-Axial Incremental Forging and Shearing: A Crystal Plasticity Analysis"
     Ali Khajezadeh, Mohammad Habibi Parsa, Hamed Mirzadeh Soltanpour, Mehdi Montazeri-pour
     Journal of Ultrafine Grained and Nanostructured Materials, Vol. 49, No 1, pp.11-16, 2016
216. "Physically-based constitutive modeling of NiTi intermetallic compound during hot deformation"
     Hamed Mirzadeh Soltanpour, Mohammad Habibi Parsa
     CANADIAN METALLURGICAL QUARTERLY, Vol. 55, No 3, pp.387-390, 2016
217. "A comprehensive approach for quantitative characterization and modeling of composite microstructures"
     Mohammad Rezayat, Mahsa Gharechomaghlu, Hamed Mirzadeh Soltanpour, Mohammad Habibi Parsa
     APPLIED MATHEMATICAL MODELLING, Vol. 40, No 40, pp.8826-8831, 2016
218. "Dynamic recrystallization kinetics in Mg-3Gd-1Zn magnesium alloy during hot deformation"
     Hamed Mirzadeh Soltanpour, Milad Roostaei, Mohammad Habibi Parsa, Reza Mahmuodi
     INTERNATIONAL JOURNAL OF MATERIALS RESEARCH, Vol. 107, No 3, pp.277-279, 2016
219. "A simple Zerilli–Armstrong constitutive equation for modeling and prediction of hot deformation flow stress of steels"
     Tina Mirzaie, Hamed Mirzadeh Soltanpour, Jose Maria Cabrera
     MECHANICS OF MATERIALS, Vol. 94, No 94, pp.38-45, 2016
220. "Constitutive modeling of commercial pure titanium during hot deformation in alpha and beta phase fields"
     Hamed Mirzadeh Soltanpour
     INDIAN JOURNAL OF ENGINEERING AND MATERIALS SCIENCES, Vol. 23, No 1, pp.60-64, 2016
221. "A Simple Constitutive Model for Prediction of Single-Peak Flow Curves Under Hot Working Conditions"
     Roxana Baktash, Hamed Mirzadeh Soltanpour
     JOURNAL OF ENGINEERING MATERIALS AND TECHNOLOGY-TRANSACTIONS OF THE ASME, Vol. 138, No 2, 2016
222. "Quantification of the strengthening effect of rare earth elements during hot deformation of Mg-Gd-Y-Zr magnesium alloy"
     Hamed Mirzadeh Soltanpour
     Journal of Materials Research and Technology-JMR&T, Vol. 5, No 1, pp.1-4, 2016
223. "Mathematical modeling of energy transfer to sheet surface layers and optimization of roll bonding strength"
     Abolfazl Sanchulia, Mohammad Habibi Parsa, Hamid Reza Ghasemi Monfared Rad, Hamed Mirzadeh Soltanpour
     INTERNATIONAL JOURNAL OF MATERIALS RESEARCH, Vol. 106, No 12, pp.1250-1257, 2015
224. "Unraveling the Effect of Thermomechanical Treatment on the Dissolution of Delta Ferrite in Austenitic Stainless Steels"
     Mohammad Rezayat, Hamed Mirzadeh Soltanpour, Masih Namdar, Mohammad Habibi Parsa
     METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, Vol. 47, No 2, pp.641-648, 2015
225. "Crystal Plasticity Analysis of Texture Evolution of Pure Aluminum During Processing by a New Severe Plastic Deformation Technique"
     Ali Khajezadeh, Mohammad Habibi Parsa, Hamed Mirzadeh Soltanpour
     METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, Vol. 47, No 2, pp.941-948, 2015
226. "Dependency of Deformation Behavior of Retained Austenite in TRIP Steels on Microstructural and Chemical Homogeneity"
     Ghavam Azizi, Hamed Mirzadeh Soltanpour, Mohammad Habibi Parsa
     Acta Metallurgica Sinica (English Letters), Vol. 28, No 10, pp.1272-1277, 2015
227. "Deformation of Pure Aluminum Along the Groove Path of ECAP-Conform Process"
     Vahid Ayati, Mohammad Habibi Parsa, Hamed Mirzadeh Soltanpour
     ADVANCED ENGINEERING MATERIALS, Vol. 18, No 2, pp.319-323, 2015
228. "Martensite phase reversion-induced nano/ ultrafine grained AISI 304L stainless steel with magnificent mechanical properties"
     Mohammad Shirdel, Saber Neisi-minaei, Hamed Mirzadeh Soltanpour, Mohammad Habibi Parsa
     Journal of Ultrafine Grained and Nanostructured Materials, Vol. 48, No 1, pp.53-58, 2015
229. "The effect of primary thermo-mechanical treatment on TRIP steel microstructure and mechanical properties"
     Ghavam Azizi, Hamed Mirzadeh Soltanpour, Mohammad Habibi Parsa
     MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, Vol. 639, No 639, pp.402-406, 2015
230. "A simple constitutive model for predicting flow stress of medium carbon microalloyed steel during hot deformation"
     Zohreh Akbari, Hamed Mirzadeh Soltanpour, JOSE MARIA CABRERA
     MATERIALS & DESIGN, Vol. 77, No 77, pp.126-131, 2015
231. "A Simplified Approach for Developing Constitutive Equations for Modeling and Prediction of Hot Deformation Flow Stress"
     Hamed Mirzadeh Soltanpour
     METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, Vol. 46, No 46, pp.4027-4037, 2015
232. "Constitutive modeling and prediction of hot deformation flow stress under dynamic recrystallization conditions"
     Hamed Mirzadeh Soltanpour
     MECHANICS OF MATERIALS, Vol. 85, No 85, pp.66-79, 2015
233. "Hot deformation behavior, dynamic recrystallization, and physically-based constitutive modeling of plain carbon steels"
     Sepideh Saadatkia, Hamed Mirzadeh Soltanpour, JOSE MARIA CABRERA
     MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, Vol. 636, No 636, pp.196-202, 2015
234. "Hot compression behavior of GZ31 magnesium alloy"
     Milad Roostaei, Mohammad Habibi Parsa, Reza Mahmuodi, Hamed Mirzadeh Soltanpour
     JOURNAL OF ALLOYS AND COMPOUNDS, Vol. 631, No 631, pp.1-6, 2015
235. "Nano/ultrafine grained austenitic stainless steel through the formation and reversion of deformation-induced martensite: Mechanisms, microstructures, mechanical properties, and TRIP effect"
     Mohammad Shirdel, Hamed Mirzadeh Soltanpour, Mohammad Habibi Parsa
     MATERIALS CHARACTERIZATION, Vol. 103, No 103, pp.150-161, 2015
236. "Simple physically-based constitutive equations for hot deformation of 2024 and 7075 aluminum alloys"
     Hamed Mirzadeh Soltanpour
     TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, Vol. 25, No 5, pp.1614-1618, 2015
237. "Physically based constitutive description of OFHC copper at hot working conditions"
     Hamed Mirzadeh Soltanpour
     KOVOVE MATERIALY-METALLIC MATERIALS, Vol. 53, No 2, pp.105-111, 2015
238. "Enhanced Mechanical Properties of Microalloyed Austenitic Stainless Steel Produced by Martensite Treatment"
     Mohammad Shirdel, Hamed Mirzadeh Soltanpour, Mohammad Habibi Parsa
     ADVANCED ENGINEERING MATERIALS, Vol. 17, No 8, pp.1226-1233, 2015
239. "Constitutive Description of 7075 Aluminum Alloy During Hot Deformation by Apparent and Physically-Based Approaches"
     Hamed Mirzadeh Soltanpour
     JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, Vol. 24, No 3, pp.1095-1099, 2015
240. "Rate controlling mechanisms during hot deformation of Mg–3Gd–1Zn magnesium alloy: Dislocation glide and climb, dynamic recrystallization, and mechanical twinning"
     Hamed Mirzadeh Soltanpour, Milad Roostaei, Mohammad Habibi Parsa, Reza Mahmuodi
     MATERIALS & DESIGN, Vol. 68, No 68, pp.228-231, 2015
241. "Multi-Axial Incremental Forging and Shearing as a New Severe Plastic Deformation Processing Technique"
     Mehdi Montazeri-pour, Mohammad Habibi Parsa, Hamed Mirzadeh Soltanpour
     ADVANCED ENGINEERING MATERIALS, Vol. 17, No 8, pp.1197-1207, 2015
242. "Estimation of the kinetics of martensitic transformation in austenitic stainless steels by conventional and novel approaches"
     Mohammad Shirdel, Hamed Mirzadeh Soltanpour, Mohammad Habibi Parsa
     MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, Vol. 624, No 624, pp.256-260, 2015
243. "Quantification of the strengthening effect of reinforcements during hot deformation of aluminum-based composites"
     Hamed Mirzadeh Soltanpour
     MATERIALS & DESIGN, Vol. 65, No 65, pp.80-82, 2015
244. "Prediction of Proper Temperatures for the Hot Stamping Process Based on the Kinetics Models"
     Pedram Samadian, Mohammad Habibi Parsa, Hamed Mirzadeh Soltanpour
     JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, Vol. 24, No 2, pp.572-585, 2014
245. "Constitutive behaviors of magnesium and Mg–Zn–Zr alloy during hot deformation"
     Hamed Mirzadeh Soltanpour
     MATERIALS CHEMISTRY AND PHYSICS, Vol. 152, No 152, pp.123-126, 2014
246. "Prediction of Temperatures of Austenite Equilibrium Transformations in Steels During Thermomechanical Processing"
     Pedram Samadian, Mohammad Habibi Parsa, Mahmoud Nili Ahmadabadi, Hamed Mirzadeh Soltanpour
     JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, Vol. 23, No 10, pp.3710-3717, 2014
247. "Estimating interface bonding strength in clad sheets based on tensile test results"
     Hamid Reza Akramifard, Hamed Mirzadeh Soltanpour, Mohammad Habibi Parsa
     MATERIALS & DESIGN, Vol. 64, No 64, pp.307-309, 2014
248. "Microstructural Evolution During Normal/Abnormal Grain Growth in Austenitic Stainless Steel"
     Hamid Reza Akramifard, Hamed Mirzadeh Soltanpour, Mohammad Habibi Parsa
     METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, Vol. 45, No 11, pp.5185-5193, 2014
249. "Abnormal grain growth in AISI 304L stainless steel"
     Mohammad Shirdel, Hamed Mirzadeh Soltanpour, Mohammad Habibi Parsa
     MATERIALS CHARACTERIZATION, Vol. 97, No 97, pp.11-17, 2014
250. "Constitutive analysis of Mg–Al–Zn magnesium alloys during hot deformation"
     Hamed Mirzadeh Soltanpour
     MECHANICS OF MATERIALS, Vol. 77, No 77, pp.80-85, 2014
251. "A comparative study on the hot flow stress of Mg–Al–Zn magnesium alloys using a simple physically-based approach"
     Hamed Mirzadeh Soltanpour
     Journal of Magnesium and Alloys, Vol. 2, No 3, pp.225-229, 2014
252. "Cladding of aluminum on AISI 304L stainless steel by cold roll bonding: Mechanism, microstructure, and mechanical properties"
     Hamid Reza Akramifard, Hamed Mirzadeh Soltanpour, Mohammad Habibi Parsa
     MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, Vol. 613, No 613, pp.232-239, 2014
253. "Constitutive description of severely deformed metals based on dimensional analysis"
     Mehdi Montazeri-pour, Mohammad Habibi Parsa, Hamed Mirzadeh Soltanpour
     MATERIALS SCIENCE AND TECHNOLOGY, Vol. 30, No 6, pp.719-724, 2014
254. "Hot deformation and dynamic recrystallization of NiTi intermetallic compound"
     Hamed Mirzadeh Soltanpour, Mohammad Habibi Parsa
     JOURNAL OF ALLOYS AND COMPOUNDS, Vol. 614, No 614, pp.56-59, 2014
255. "Molecular dynamics simulation of stress field around edge dislocations in Aluminum"
     Mohammad Soleymani, Mohammad Habibi Parsa, Hamed Mirzadeh Soltanpour
     COMPUTATIONAL MATERIALS SCIENCE, Vol. 84, No 84, pp.83-96, 2014
256. "Optimization of turning process using artificial intelligence technology"
     Rasool Mokhtari Homami, Alireza Fadaei Tehrani, Hamed Mirzadeh Soltanpour, Behrooz Movahedi, Farhad Azimifar
     INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, Vol. 5-8, No 70, pp.1205-1217, 2014
257. "Hot deformation behavior of austenitic stainless steel for a wide range of initial grain size"
     Hamed Mirzadeh Soltanpour, Mohammad Habibi Parsa, Donya Ohadi
     MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, Vol. 569, pp.54-60, 2013
258. "Development of Dynamic Recrystallization Maps Based on the Initial Grain Size"
     Donya Ohadi, Mohammad Habibi Parsa, Hamed Mirzadeh Soltanpour
     MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, Vol. 565, No 3, pp.90-95, 2013
259. "Hot Deformation and Dynamic Recrystallization of 17-4 PH Stainless Steel"
     Hamed Mirzadeh Soltanpour, عباس نجفی زاده
     ISIJ INTERNATIONAL, Vol. 53, No 4, pp.680-689, 2013
260. "Modeling the compressive strength of cement mortar nano-composites"
     Hamed Mirzadeh Soltanpour, Amir Zomorodian
     Computers and Concrete, Vol. 10, No 1, pp.49-57, 2012
261. "EBSD study of a hot deformed austenitic stainless steel"
     Hamed Mirzadeh Soltanpour, Jose Maria Cabrera , Abbas Najafizadeh
     MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, Vol. 538, No 538, pp.236-245, 2012
262. "Modeling and Prediction of Hot Deformation Flow Curves"
     Hamed Mirzadeh Soltanpour, Jose Maria Cabrera , Abbas Najafizadeh
     METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, Vol. 43, No 1, pp.108-123, 2012
263. "بررسی ریزساختار سوپرآلیاژ اینکونل 718 در حالت های ریختگی و همگن سازی شده"
     محمد جواد سهرابی، حامد میرزاده سلطان پور
     نشریه مهندسی متالورژی، نسخه 22، شماره 4، صفحات:290-295، 1398
264. "محاسبه ضرایب نفوذ عناصر در اثر عملیات همگن سازی سوپرآلیاژ اینکونل 718 ریختگی"
     محمد جواد سهرابی، حامد میرزاده سلطان پور
     پژوهشنامه ریخته گری، نسخه 3، شماره 3، 1398
265. "سینتیک رشد دانه در آلیاژهای منیزیم حاوی آلومینیوم و عنصر نادر خاکی گادولینیم"
     بیتا پوربهاری، حامد میرزاده سلطان پور، مسعود امامی
     مواد پیشرفته در مهندسی، نسخه 37، شماره 4، صفحات:1-11، 1397
266. "معادله رفتاری پایه فیزیکی برای پیش بینی تنش سیلان فولاد میکروآلیاژی در حین تغییرشکل داغ"
     حامد میرزاده سلطان پور
     نشریه مهندسی متالورژی و مواد، نسخه 21، شماره 1، صفحات:10-15، 1397
267. "کنترل ریزساختار و خواص مکانیکی فولاد زنگ نزن آستنیتی توسط بازگشت مارتنزیت کرنشی و تبلور مجدد آستنیت باقیمانده"
     میثم نقی زاده، حامد میرزاده سلطان پور
     نشریه مهندسی متالورژی و مواد، نسخه 19، شماره 1، صفحات:22-30، 1395

مقالات علمی ارائه شده در همایش‌ها

1. "Grain refinement and improved tensile properties of Ti-modified AISI 316L stainless steel by cold rolling and annealing"
   Sajedeh Valeh, Hamed Mirzadeh Soltanpour
   9th International Biennial Conference on Ultrafine Grained and Nanostructured Materials, 2023
2. "Achieving nanostructured superaustenitic stainless steel by severe plastic deformation"
   Mohammad Javad Sohrabi, Hamed Mirzadeh Soltanpour, Reza Mahmuodi, Milad Roostaei
   9th International Biennial Conference on Ultrafine Grained and Nanostructured Materials, 2023
3. "Improved mechanical properties, grain refinement, and modification of Mg-Si in situ composites by yttrium addition and adjusting cooling rate during solidification"
   Fatemeh Asghari, Mehdi Malekan, Hamed Mirzadeh Soltanpour
   9th International Biennial Conference on Ultrafine Grained and Nanostructured Materials, 2023
4. "Fine-Grained Duplex Stainless Steel by Cold Rolling and Reversion/Recrystallization Annealing"
   Mohammad Saleh Geshani, Hamed Mirzadeh Soltanpour
   9th International Biennial Conference on Ultrafine Grained and Nanostructured Materials, 2023
5. "Induction of TWIP effect in a TRIP-aided AISI 304L steel by grain refinement"
   Mohammad javad Sohrabi, Hamed Mirzadeh Soltanpour, Saeed Sadeghpour Galooyak, Reza Mahmuodi
   Steel Symposium 402, 2023
6. "Effect of aging treatment on the improvement of tensile properties of Mg95.5Y3Zn1.5 (at.%) alloy"
   Amirhossein Asadi, Hamed Mirzadeh Soltanpour, Mehdi Malekan
   11th International conference on Materials and Metallurgical Engineering, 2022
7. "An alternative method for the evaluation of anisotropy in the cold rolled sheets"
   Sara Mohammadzehi, Hamed Mirzadeh Soltanpour, Mohammad javad Sohrabi, Reza Mahmuodi
   11th International conference on Materials and Metallurgical Engineering, 2022
8. "Ultrafine grained Mg-Zn-Zr magnesium alloy via microalloying with rare earth elements and hot extrusion"
   Hooman Abedi, Hamed Mirzadeh Soltanpour, Massoud Emamy, Jafar Rasi Zadeh Ghani, M.. Raayatpour
   The 8th International Biennial Conference on Ultrafine Grained and Nanostructured Materials (UFGNSM2021), 2021
9. "Phase analysis of Mg-Si-Ni in-situ composites"
   Nima Barri, Amir Reza Salasel, Hamed Mirzadeh Soltanpour, Massoud Emamy, Mehdi Malekan
   Biennial International Conference on Experimental Solid Mechanics (X-Mech 2020), 2020
10. "Importance of grain growth during intercritical anneal of advanced high-strength dual-phase steels"
    Fateme Najafkhani, Hamed Mirzadeh Soltanpour
    Biennial International Conference on Experimental Solid Mechanics (X-Mech 2020), 2020
11. "Reversion and recrystallization of AISI 316L austenitic stainless steel"
    Sara Kheiri, Hamed Mirzadeh Soltanpour
    IMAT 2019, 2019
12. "Grain refinement of low-carbon steels by cold rolling and tempering of martensite"
    Arsalan Ajami, Hamed Mirzadeh Soltanpour, Mostafa Najafi
    IMAT 2019, 2019
13. "Effects of hot extrusion and rare earth addition on grain refinement of ZK20 magnesium alloy"
    Ehsan Fathi, Hamed Mirzadeh Soltanpour, Massoud Emamy
    IMAT 2019, 2019
14. "Effect of hot extrusion on microstructure and mechanical properties of Mg-Zn-0.5Ca-0.5RE alloys"
    mobasheri Mohamad, Mahbod Golrang, Hamed Mirzadeh Soltanpour, Massoud Emamy
    IMAT 2019, 2019
15. "Dependency of the mechanical properties of step quenched dual phase steels on the volume fraction of martensite"
    Maryam Soleimani, Hamed Mirzadeh Soltanpour, Changiz Dehghanian
    IMAT 2019, 2019
16. "A simple method for grain refinement of low carbon dual phase steels"
    Sheida Nikkhah, Hamed Mirzadeh Soltanpour
    IMAT 2019, 2019
17. "Cyclic intercritical annealing of dual phase (DP) steel"
    Seyedeh yasamin Khebreh farshchi, Hamed Mirzadeh Soltanpour
    IMAT 2019, 2019
18. "Effect of Mold Material on Cooling Curves of Aluminum during Solidification"
    Zahra Fallahi, Hanie Yegane, Mehdi Malekan, Hamed Mirzadeh Soltanpour, Massoud Emamy, Bita Pourbahari
    7th International Conference on Materials Engineering and Metallurgy, 2018
19. "Enhanced mechanical properties of dual phase steel by a simple thermo-mechanical processing route"
    Mahsa Nouroozi, Hamed Mirzadeh Soltanpour, Mehran Zamani
    7th International Conference on Materials Engineering and Metallurgy, 2018
20. "Continuous Cooling Analysis of Solidifying Pure Aluminum"
    Hanie Yegane, Zahra Fallahi, Hamed Mirzadeh Soltanpour, Mehdi Malekan, Massoud Emamy, Bita Pourbahari
    7th International Conference on Materials Engineering and Metallurgy, 2018
21. "Intercritical Annealing Response of AISI 4130 Steel"
    Mehran Zamani, Hamed Mirzadeh Soltanpour, Hamid Reza Ghasemi Monfared Rad
    7th International Conference on Materials Engineering and Metallurgy, 2018
22. "Phase Analysis of the As-Cast Sn-20.44Zn-19.86Cu-11.79Al-7.59Mg Multi-Element Alloy"
    Hasti Khodashenas, Hamed Mirzadeh Soltanpour, Mehdi Malekan, Massoud Emamy, Bita Pourbahari
    7th International Conference on Materials Engineering and Metallurgy, 2018
23. "Carbon Nanotube Reinforced Aluminum-Based Nanocomposites Processed by Mechanical Alloying"
    Alireza Abasi, Amir Reza Salasel, Nima Barri, Hamed Mirzadeh Soltanpour
    International Congress on Science and Engineering, 2018
24. "On the removal of Laves phase in Inconel 718 superalloy"
    Mohammad Javad Sohrabi, Hamed Mirzadeh Soltanpour, Mohsen Rafiei
    2nd International Conference on Applied Research in Science, Technology and Knowledge, 2018
25. "On the formation of Laves phase in an as-cast typical Nb-bearing Ni-based superalloy"
    Mohsen Rafiei, Hamed Mirzadeh Soltanpour, Mehdi Malekan, Mohammad Javad Sohrabi
    2nd International Conference on Applied Research in Science, Technology and Knowledge, 2018
26. "Fracture behavior and mechanical properties of as-cast in-situ aluminum-based composite processed by hot rolling and hot extrusion"
    Rashadoddin Zamani, Hamed Mirzadeh Soltanpour, Massoud Emamy
    2nd International Conference on Applied Research in Science, Technology and Knowledge, 2018
27. "The Effect of Elevated Temperature Homogenization and Extrusion on the Microstructure and Mechanical Properties of Al-Mg2Si in-situ composite"
    Rashadoddin Zamani, Massoud Emamy, Hamed Mirzadeh Soltanpour
    Iran International Aluminium Conference (IIAC2018), 2018
28. "Processing of Fine-Grained Al-Mg2Si in-situ Composite"
    Rashadoddin Zamani, Hamed Mirzadeh Soltanpour, Massoud Emamy
    8th International Conference on Nanotechnology (ICN2018), 2018
29. "Fine Grained Ferrite by Continuous Recrystallization of Cold-Rolled Martensite"
    Mostafa Najafi, Hamed Mirzadeh Soltanpour, Mohammad Alibeyki
    1st Iran Congress on Industrial Applications of Advanced Materials and Manufacturing, 2017
30. "Ultrafine-Grained Low Carbon Steel via Cold Rolling and Annealing of Martensite"
    Mostafa Najafi, Hamed Mirzadeh Soltanpour, Mohammad Alibeyki
    1st Iran Congress on Industrial Applications of Advanced Materials and Manufacturing, 2017
31. "The effect of homogenizing treatment on the Gd intermetallic compounds in Mg-Gd-Al alloys"
    Bita Pourbahari, Massoud Emamy, Hamed Mirzadeh Soltanpour
    5th International Conference on Materials Engineering and Metallurgy, 2016
32. "Microstructure evolution of GZ61 alloy in rolling and extrusion processes"
    Bita Pourbahari, Hamed Mirzadeh Soltanpour, Massoud Emamy
    5th International Conference on Materials Engineering and Metallurgy, 2016
33. "Processing of Cu-Fe/SiC Nanocomposite by Mechanical Alloying"
    Mina Rabiee, Hamed Mirzadeh Soltanpour, Abolghasem Ataei
    5th International Biennial Conference on Ultrafine Grained and Nanostructured Materials, UFGNSM15, 2015
34. "A Practical Remedy for Surface Hot Shortness in a Cu-Bearing Steel"
    Saeed Deldar, Hamed Mirzadeh Soltanpour, Mohammad Habibi Parsa
    4th international Engineering Materials and Metallurgy conference, 2015
35. "The effect of strain rate on hardness of cold drawn 304L stainless steel wires: Experiment and FEM analysis"
    Pouyan Parnian, Mohammad Habibi Parsa, Hamed Mirzadeh Soltanpour
    3rd international Engineering Materials and Metallurgy conference, 2015
36. "Strain and hardness evaluation of Al 1100 bar subjected to CONFORM process"
    Vahid Ayati, Mohammad Habibi Parsa, Hamed Mirzadeh Soltanpour
    3rd international Engineering Materials and Metallurgy conference, 2014
37. "How multi-axial incremental shearing makes a difference?"
    Ali Khajezadeh, Mohammad Habibi Parsa, Hamed Mirzadeh Soltanpour, Mehdi Montazeri-pour
    3rd international Engineering Materials and Metallurgy conference, 2014
38. "تشکیل مارتنزیت ناشی از کرنش در فولادهای زنگ نزن آستنیتی و تاثیر آن بر خواص مکانیکی"
    حامد میرزاده سلطان پور، محمد جواد سهرابی
    نهمین کنفرانس بین المللی مهندسی مواد و متالورژی (IMAT2020)، 1399
39. "وابستگی انرژی ضربه به خواص کششی فولاد"
    محمدجواد سهرابی، حامد میرزاده سلطان پور، محسن رفیعی
    سمپوزیوم فولاد 98، 1398
40. "معادله رفتاری پایه فیزیکی برای بیان تنش سیلان داغ فولادها"
    تینا میرزایی، حامد میرزاده سلطان پور
    13 مین همایش علمی دانشجویی مهندسی مواد و متالورژی ایران، 1395
41. "ارزیابی رفتار تغییرشکل گرم فولادهای ساده کربنی"
    سپیده سعادت کیا، حامد میرزاده سلطان پور
    13 مین همایش علمی دانشجویی مهندسی مواد و متالورژی ایران، 1395
42. "بهبود خواص مکانیکی فولاد دو فازی توسط چرخه های حرارتی"
    سجاد قائمی فر، حامد میرزاده سلطان پور
    13 مین همایش علمی دانشجویی مهندسی مواد و متالورژی ایران، 1395
43. "تاثیر فرآیند کروی سازی بر خواص مکانیکی فولاد دو فازی"
    زهرا نصیری، حامد میرزاده سلطان پور
    13 مین همایش علمی دانشجویی مهندسی مواد و متالورژی ایران، 1395
44. "ارزیابی توزیع ذرات در کامپوزیت های تولید شده به روش نورد تجمعی"
    قره چماقلو قره چماقلو، حامد میرزاده سلطان پور
    13 مین همایش علمی دانشجویی مهندسی مواد و متالورژی ایران، 1395
45. "کنترل خواص مکانیکی فولاد دوفازی توسط ریزساختار اولیه"
    علیرضا کلهر، حامد میرزاده سلطان پور
    13 مین همایش علمی دانشجویی مهندسی مواد و متالورژی ایران، 1395
46. "تاثیر اتصال سرد با نورد بر خواص مکانیکی کامپوزیت های لایه ای آلومینیوم/فولاد زنگ نزن"
    نوید محمدنژادفرد، حامد میرزاده سلطان پور
    13 مین همایش علمی دانشجویی مهندسی مواد و متالورژی ایران، 1395
47. "کنترل خواص مکانیکی فولاد کربنی توسط تولید ساختار فریتی با اندازه دانه مخلوط ریز و درشت"
    محسن بالاور، حامد میرزاده سلطان پور
    13 مین همایش علمی دانشجویی مهندسی مواد و متالورژی ایران، 1395
48. "تحولات ریزساختاری در حین آنیل یک فولاد زنگ نزن آستنیتی پس از تغییرشکل پلاستیکی"
    میثم نقی زاده، حامد میرزاده سلطان پور
    13 مین همایش علمی دانشجویی مهندسی مواد و متالورژی ایران، 1395
49. "بررسی معادلات رفتاری فولاد میکروآلیاژی در حین تغییرشکل گرم"
    زهره اکبری، حامد میرزاده سلطان پور
    سمپوزیوم فولاد 94، 1394
50. "بهینه سازی فرآیند ترمومکانیکی تشکیل و بازگشت مارتنزیت کرنشی جهت تولید فولاد زنگ نزن 304 فوق ریزدانه"
    حامد میرزاده سلطان پور، عباس نجفی زاده
    اولین همایش بین المللی ششمین همایش مشترک انجمن مهندسین متالورژی و انجمن علمی ریخته گری ایران، 1391
51. "روش به دست آوردن پارامترهای معادله های رفتاری در تغییرشکل داغ"
    حامد میرزاده سلطان پور، عباس نجفی زاده
    اولین همایش بین المللی ششمین همایش مشترک انجمن مهندسین متالورژی و انجمن علمی ریخته گری ایران، 1391